Skip to content

Designing the Next Dimension: An Insight into 3D Printing Innovation

Facebook
Twitter
LinkedIn

3D printing can be an expensive sector to get into, but SPELL3D’s solution can help peel back some costs by combining the advantages of two styles of printer. The SPELL3D project is led by the University of Malta and coordinated by Prof. Arif Rochman from the Department of Industrial and Manufacturing Engineering, with Sarah Delia as the Research Support Officer alongside Prof. Ing. Pierluigi Mollicone from the Department of Mechanical Engineering and Dr Ing. Evan Dimech from the Department of Electronic Systems Engineering.

Additive manufacturing, more commonly known as 3D printing, is a technique which generates and produces parts using a computer-aided design (CAD) model or 3D digital model where material is deposited – or in technical terms, ‘extruded’ – in layers on a printing bed. The most common types of material extrusion used in 3D printing are fused filament fabrication (FFF) and fused granular fabrication (FGF). The FFF technology, also referred to as fused deposition modelling, uses filament material which is pushed through a heated nozzle to produce parts layer-by-layer. In contrast, FGF printers use polymer pellets which are melted and extruded using an extrusion screw which reduces material costs and enables freedom in material selection.

Different types of material extrusion additive manufacturing techniques, including FGF and FFF (Sketched by Prof. Arif Rochman)

A majority of FGF printers are less suitable for desktop or consumer 3D printers since they are bulky and much more expensive compared to FFF printers. The SPELL3D research project aims to solve these issues by developing an innovative pellet extruder for a 3D printer that combines the advantages of FGF and FFF 3D-printing systems, allowing for cost-effective material selection and purchasing. 

The SPELL3D extruder will allow for better polymer selection since these will be used as raw material in pellet form. SPELL3D is expected to require less material to be heated or melted, leading to lower energy consumption and fewer fumes generated. It will also not require a specialised extrusion screw design and will allow ease of creating a thermal balance between the hot and cold ends of the extruder. In addition, the SPELL3D extruder will have a quasi-linear relationship between the amount of the fed solid material and the extruded melt. The benefits of SPELL3D will extend to society as well, as SPELL3D printing will lead to reduced environmental impacts. These advantages make SPELL3D an attractive choice for 3D printer users, enhancing both efficiency and product quality. 

This project is in collaboration with industrial partner Invent3D, with David Sciberras as the Co-Founder and Chief Executive Officer. Invent3D is Malta’s largest 3D printing farm, containing around 200 3D printers which vary in shape, size, and design depending on the material, motion system, and number of axes, extruders, or nozzles, and type of user interface. Being specialists in the world of additive manufacturing, Invent3D was and is involved in several research projects related to 3D printing and product development for various industrial sectors such as construction, healthcare, aerospace, and automotive.

For more information on the SPELL3D project: https://spell3d.com/

The project is funded for three years by MCST through the FUSION: R&I Technology Development Programme (R&I-2022-010-T).

Author

More to Explore

These Insoles Are Made for Monitoring: A Step Towards Preventive Healthcare 

What if healthcare could learn more about our health between appointments? Wearable technology is opening up new possibilities for continuous monitoring, and researchers at UM’s Centre for Biomedical Cybernetics and Department of Podiatry, in collaboration with Tarsos, are making significant contributions in this area. THINK went to learn more about a research project investigating how smart insoles could improve foot health monitoring for people with diabetes.

The Chosen One? Adoption Beyond the ‘Happy Ending’

You look at your reflection in the mirror. Your face tells a story of the generations that came before you. A familiar smile, or a shared eye colour, a resemblance that has probably been pointed out more than once. For most, such observations are brushed off with a smile and quickly forgotten. But what if your reflection raised more questions than answers?

Molecular Mail: Tiny Parcels for Tracking Tumours

Tumours are not discreet. As cancer cells grow and change, they release microscopic particles into their environment. Some of these particles enter the bloodstream. They are small, abundant, and, as researchers are beginning to realise, potentially informative. A Maltese research project is testing whether extracellular vesicles can provide a less invasive source of cancer information.

Comments are closed for this article!