Skip to content
Daniel Lendi debugging HDMS

Let’s rethink our motors

Facebook
Twitter
LinkedIn

From washing machines and vacuum cleaners to air conditioners and fans, household appliances all contain electrical motors, and we tend to take them for granted. However, appliances’ high starting currents can disrupt electricity supply and shut down a whole house. Daniel Lendi unpacks some of the hard work needed to fix this problem.

My (Daniel Lendi) tech-savvy generation takes many things for granted. Entering the Electrical and Electronics Engineering course at the University of Malta (UM) helped me realise just how much thought and effort humanity has invested in technology. My passion for electrical motors and their applications grew further at university, and until today, I’m fascinated by how an electrical current passing through some copper wire can lead to the physical rotation of a motor shaft, driving electric cars and pumping water. 

My time at university also taught me that these motors introduce complications when they start. High currents can trip the Miniature Circuit Breakers inside your consumer unit. When ACs start they draw six to eight times their normal amount of energy; switching on your AC could even make your neighbour’s lights flicker! Dedicated motor starters are introduced to tackle these complications. Dr Ing. Reiko Raute (Department of Industrial Electrical Power Conversion, Faculty of Engineering, UM), with whom I worked on my dissertation, has come up with a novel prototype that aims to improve on these motor starters. Being part of his team allows me to further my studies while gaining valuable insight into industrial product development.

Justin Xuereb, Dr Ing. Reiko Raute and Daniel Lendi
Justin Xuereb, Dr Ing. Reiko Raute and Daniel Lendi. Photo by Racquel Ellul

One type of these motor starters is the soft starter (a category of reduced voltage starters). The soft starter decreases the voltage to the motor, reducing its current and keeping your house lit up. However, as a consequence, they reduce the motor’s torque – a measure of the motor’s rotational strength. A lower torque means that the motor doesn’t turn strongly enough, making your AC inefficient and possibly damaging the motor.

Raute is trying to overcome these problems with a new prototype High Dynamic Motor Starter (HDMS). The HDMS is a soft starter which tackles the issue through a fundamentally different approach. Using a dedicated control algorithm (computer code that carries out specific tasks) and a novel hardware circuit, the HDMS is able to achieve excellent starting current reduction without sacrificing so much motor torque. The development of this prototype is part of a research collaboration between UM and the development division of electronic equipment designer and manufacturer Carlo Gavazzi. Our industrial partner ensures that the product meets market expectations. Prototypes of the HDMS soft starter have already been constructed and are now being tested in heat pump installations in the UK, France, Ireland, and the USA, collecting data from each motor start they carry out. 

The development of the new starter is an ambitious feat. Our team divided it into two projects. My part is analysing the HDMS control algorithm stability and its optimisation. I took up a study module on control engineering to better understand what’s going on. The aim is to ensure that the HDMS regulates and reduces the starting current in the most stable and efficient way, using both the simulation models and the hardware prototype. For the hardware tests we built a test rig which is able to measure a motor’s torque during start-up. I have concluded the analysis, the most tedious part of my project, and am finally moving on to hardware tests to confirm its findings.

Our industrial partner ensures that the product meets market expectations.

My colleague Justin Xuereb focuses on the second project. He investigates the dynamic overload performance of the switching devices. Think of dynamic overload performance as similar to a workout: You are at the gym training with some weights, and are capable of carrying out your routine with 40kg of weights. But you want a bigger challenge and add another 20kg of weights to see how you perform for a few repetitions. This is what is done with the dynamic overload performance of the switching devices, overloading them for a short amount of time and studying their performance. Xuereb has already designed and implemented several revisions of a dedicated test circuit to investigate the overload performance of the switching devices.

My analysis has shown that Raute’s creative idea adheres to control engineering theory. The work is still continuing to ensure the HDMS’ market success. When the next-generation single-phase soft starter product for Carlo Gavazzi becomes a marketable product, our ACs will start more efficiently, even in the midst of summer.   

The project is funded by the Malta Council for Science and Technology (MCST) R&I Fusion Technology Development Project R&I-2016-035-T.

Author

More to Explore

Our Post-Truth Reality

Post-truth populism has secured a powerful mandate in the United States of America. This reflects a trend that extends through the world’s liberal democracies and will invite global imitation. In this opinion piece, Jonathan Firbank describes how post-truth populism works, why it works, and why the American election might show us how to fight it.

AGORA: Elections 2024 – Youth Absence and the Far Right Surge

During the run-up to the European Parliament Elections, Prof. Mario Thomas Vassallo grilled two MEP candidates on AGORA, a political talk show broadcast on Campus 103.7. Against the backdrop of numerous elections around the globe, a lack of youth representation, and the rise of the far right, the discussion got us thinking.

Smooth Operator: Improving Surface Finish in Additive Manufacturing

While the advent of 3D metal printing may redefine how designers develop parts for products, the process itself is not without faults. Andre Giordimaina speaks with THINK about the GLAM Project, which aims to improve the process of 3D metal printing by optimising the finish and performance of designed parts.

Comments are closed for this article!